How to choose multirip saws for cutting large-diameter logs?

Sooner or later, medium and large woodworking enterprises are faced with the choice of sawing equipment. As a rule, at such enterprises specialized machines are used for cutting logs, to further process them in ready complexes.
However, you can face the problem of equipment selection. Not all companies available on the market, we can offer specialized machines designed for sawing logs of large diameter.

The company TD “Kotelnich mechanical plant” production enterprise, the basic direction of activity is manufacture of timber and woodworking equipment. The company's specialists are always ready to give competent advice, the correct choosing the right woodworking machine.
Have you faced the problem of choosing the right equipment? Is it hard to choose a rip saw? What problems you may encounter when sawing logs of large diameter?

Your opinion matters to us, we consider your comments to make our work better and more productive.

Translated by «Yandex.Translator»

---

МОЛОМ - Проектирование Изготовление Внедрение
kmz43.сom

Hello! I do pilavci birch, please tell me, the material is not simple, what hardware can offer, to get maximum product cut?
Translated by «Yandex.Translator»

Good day!
Thank You for your attention to this subject!
Really, the issue with the cutting of the birch, of concern to many. And there is a controversial opinion, which is better frame or band sawing machines.
The specialists of Trading House “KMZ” recommend to pay attention on the equipment belt. For example, the model SPM-600 SPM-1100, great deal with the cutting of birch, and will enable us to obtain the maximum amount of material.
Using the technology of sawing logs on the band saw with rotation. To increase yield of quality lumber recommend the use as raw material only the main part (the first cut, length a 2.8 or 3.1 meters), diameter 26 cm, in the presence of false heartwood is not more than 1/3 .
On the band sawmill, this is achieved by rotating the log 90 or 180 degrees.
Translated by «Yandex.Translator»

---

МОЛОМ - Проектирование Изготовление Внедрение
kmz43.сom

write another such moment how best to work with birch, not bent much?
Translated by «Yandex.Translator»

Good day!
The procedure of cutting like this: removed from one side of the slab, then obapol (podgorela Board), wherein the beam is curved (not always). The log is then flipped, and the same procedure on the opposite side, the tension with the barrel removed, the beam stops bending. Continue cutting as usual. This problem is particularly acute when the SAP flow, and early winter, when the wood is not frozen completely. But it all depends on the forest,with whom you will work, and from the growing region of the material.
Translated by «Yandex.Translator»

---

МОЛОМ - Проектирование Изготовление Внедрение
kmz43.сom

that's what I want to mention your company, it's for competent advice. Rarely seen of.the account of the company, which is not only spam, but also gives really useful info. Thank you.
Translated by «Yandex.Translator»

Good morning, Forest!
Thank You for your positive feedback about the company LLC TD “KMZ” and for the high appreciation of our work! Poresa continue to delight You with competent advice from our experts!
Sincerely, LLC TD “KMZ”.
Translated by «Yandex.Translator»

---

МОЛОМ - Проектирование Изготовление Внедрение
kmz43.сom

LLC TDKS
Good day!
Thank You for your attention to this subject!
Really, the issue with the cutting of the birch, of concern to many. And there is a controversial opinion, which is better frame or band sawing machines.
The specialists of Trading House “KMZ” recommend to pay attention on the equipment belt. For example, the model SPM-600 SPM-1100, great deal with the cutting of birch, and will enable us to obtain the maximum amount of material.
Using the technology of sawing logs on the band saw with rotation. To increase yield of quality lumber recommend the use as raw material only the main part (the first cut, length a 2.8 or 3.1 meters), diameter 26 cm, in the presence of false heartwood is not more than 1/3 .
On the band sawmill, this is achieved by rotating the log 90 or 180 degrees.

thank you very much, took your advice on other forums, too good comments were, but this method is really working. Just now winter, and the problem with the sawing began. After two hours, the saw starts to cut poorly, and the teeth zapenivayutsya...what to do?
Translated by «Yandex.Translator»

Good day! Thank You for your interest to this topic and for the feedback! On average, one good saw, designed for 10-12 m3 of logs, but after two hours of continuous sawing it must be removed to cool.
You are right, this machine required frequent replacement drink. On average, during the year, you may need to drink up to 100, depending on how many shifts you work on the machine. If You are working with wood tar, need belt with special sharpening – normal teeth will "stick".

Sincerely, company TD “KMZ”.
Translated by «Yandex.Translator»

---

МОЛОМ - Проектирование Изготовление Внедрение
kmz43.сom

you can try to contact the company Energotech, they just specialize in such equipment. And they can be ordered by the way and your machine to repair
Translated by «Yandex.Translator»