Equipment: Boiler KW-1 mW №22389

June 18, 2017, 8:15 p.m.Views: 861

City: Kirov, Kirov region, Russia

Organization name: show name and reputation

Type: Other

Equipment name: Boiler KW-1 mW

Price: 15,080.14 $

Description:
Manufacture and install solid fuel boilers for wood waste designed for combustion of fuel with the natural and high humidity. Efficiency measurements of the Agency of energy efficiency of 87.7%.
The construction of the boiler provides for the lack of "dew point" that increases the lifetime of the boiler significantly.
The boiler is designed to burn solid fuels with high moisture content.
A distinctive feature of the boiler is a furnace chamber by combustion of fuel without the volume of water in the combustion zone, eliminating chemical incomplete combustion of carbon.
The design of the boiler is planned taking into account the chemical and physical processes of fuel combustion.
Efficiency hot water boilers series of KVAT for measuring the Agency is Saving on firewood of 87.6%.
Simple operation, maintenance and cleaning of the boiler 1 once a year. The lack of "typical" problems with a high ash content and poor traction, since the complete combustion of the main fuel composition flue gas CO2(carbon dioxide). Bulk CO2 is lighter than air, the CO2 in the water vapor H2O, getting into the flue tract tend to leave and create a vacuum in the boiler (traction) required for normal operation of the boiler.
In hot water boilers, solid fuel boilers series .. there is no heat removal in the combustion zone of the fuel, but rather there is a return of heat in the form of radiant energy. This increases the combustion temperature of the fuel up to t=1000 °C or more, excluding chemical incomplete combustion of carbon.
Exhaust fans are not required and their installation on other boilers in reality reduces the efficiency of these units, do not forget that when we pumped through the combustion zone, large volumes of air, accelerating the progress of the gases through the heat exchanger reduces a convective ability, in the end, we heated the atmosphere (air in the boiler in any case, through the boiler room comes from the street).
Why work directly with the manufacturer?
• Communicate directly with the Executive order allows qualitatively and in time to solve the problem.
• Allows to solve the problem comprehensively. In addition to the supply of the boiler carry out the selection and installation of equipment for his work – boiler room under the key.
• Excludes markup of the intermediary, decreases the share of transportation costs
• Support, warranty and after warranty service without the "broken telephone".
Individual approach to each client, free visit to your site throughout the Russian Federation. The solution of the problem comprehensively. Service: "boiler turnkey". Then you will only have to light the match and enjoy the result of collaboration.
Boilers with manual fuel feeding and automatic cycle of operation of the boiler is combined with a hydraulic flow of sawdust. A programmable control Board, multiple levels of protection from accident. The management of the shield, is simple and intuitive for all. During automatic operation of the boiler the Stoker is to monitor the completeness of hopper and loading it up with intervals 1.5-3 hours, depending on the load on the boiler, and also once per shift to clean the ash pan(under the grate space).

Contact details: show contacts