Special offer
Brokerage services in the Russian Federation
Organization name: LLC "Lesnoy Resurs"
Tax id: 5445023273
Type of service: Brokerage services
Cost: 32.43 $
Selling Wood Mouldings lining conifers:pine in Novgorod region Russia №48926 | WoodResource.com
Organization name: Inter-Forest LLC
Tax id:
Type: Lining
Wood species: Conifers:pine
Moisture content: The dry forest
Price per meter: 0.29 $
Price per square meter: 3.24 $
Selling Lumber edging:board conifers:pine in Khanty-Mansi Autonomous Okrug Russia №49271 | WoodResource.com
Organization name: LLC LPC "Samza"
Tax id:
Type: Edging:board
Wood species: Conifers:pine
Moisture content: Shipping dry
Length in mm: 2000 - 6000
Width in mm: 100 - 200
Thickness in mm: 22 - 45
Stock:
Price per cubic meter: 281.06 $
Equipment: FC-2, FC-3 Machine Stripping wire to scrap №36405
July 11, 2019, 12:07 p.m.Views: 387
City: Stary Oskol, Belgorod region, Russia
Organization name: show name and reputation
Type: Other
Equipment name: FC-2, FC-3 Machine Stripping wire to scrap
Price: 0.01 $
Description:
Machine for the cleaning of the insulation from the FC-2, FC-3 is an effective universal stationary Electromechanical design of horizontal type of periodic operation, which is used for the disposal of waste cable insulation.
This operation allows to use the extracted metal mine again.
Machine Stripping thick wires. For this model increased the possible length of strip up to 60 mm.
Features
• Machine cleaning of the insulation from the FC-2, FC-3 is an effective universal stationary Electromechanical design of horizontal type of periodic operation, which is used for the disposal of waste cable insulation. This operation allows to use the extracted metal mine again.
• Machine Stripping wire to scrap metal FC-2, FC-3 is available in the form of a separate operating unit on a metal frame, inside which is fixed the motor. Support frame is additionally equipped with two wheels of small diameter, which allows you to roll the design inside the shop premises of even a single employee.
• The cable is fed into the operating area by one of the 10 pilot holes with a suitable diameter. The resulting material is fed to the output tray.
Contact details: show contacts
Translated by «Yandex.Translator»