#1 March 3, 2016 13:32:35

Валентин
Registered: 2014-11-10
Posts: 18
Profile   Send e-mail  

SELL WOODWORKING machinery/used

- Combined machine control unit Omersan 05
- Air piston compressor control unit 430 С415М1 L.
- Trimming machine DPC-500
- Grinding machine for circular saws CCS-2
Milling with inclined model T 1000 S + AutoPatcher.

- Surface gauge 400
- 250 jointer

Drilling-filler machine BU Italmac Cuspide 21
Drilling-filler machine Boo Vitap ALFA 21
Drilling-filler machine BU SCM Advance 21

- Format-panel saw Felder K700S BU
- Sliding table 3200 Omnia
- Dimensioning machine control unit Italmac Omnia-3200 V
- Dimensioning machine control unit Stomana S3200L
- Dimensioning machine Boo BOOM 3200 Sicar
- Dimensioning machine control unit Griggio CA 400
- Sliding panel saw 3200 Omnia Maxi 2013

- Edgebander GRIGGIO GB 60-10 BU
- Edgebander BU Yuton MFS-503 (WT-91)
- Edgebander Vitap BU BC91A
- Edgebander BU Sabir Cumba | Dram.0.5-3.0 mm, Scram.10-50 mm, up to 6 m/min.

-
- Ed. Kromochnik MDZ 515B (WT 4/3) BU | 0.4-3.0 mm, the sticker edges, trimming, removal of overhangs, sanding, polishing.
- Ed. Kromochnik Griggio GB 4/8 BU | 0.4-8.0 mm 12-16 m/min, trimming, milling of overhangs, sanding, polishing.
- Ed. Kromochnik SIETRO 3.2 (3.2 MFZ) 2011 like new. - trimming, milling of overhangs, polishing.
- Edge banding machine Stomana control unit KZM-2
- Edgebander TECNOMA XT BA 5.4
- Edge Bander Artech LATO 23S BU
-
- Moulder WINNER Blazer BL 6-23B | 6 spind., 230х125 mm 6-36 m/min, 6000 rpm + tool.
- Moulder GRIGGIO G220/6U BU | 6 spind., 220х160 mm, 4-24 m/min, 38.7 kW, N-P-L-b-b-Univ. (360 deg.)
-
- Moulder Weinig Unimat 300 | 5 spend., 230х125 mm, 24 kW, 6-12 m/min.
Milling machine control unit, CNC Art-Master 2112

Membrane vacuum press VPF-2 for 2500х1400 veneer curly, angled and rounded profiles with veneer, melamine paper, PVC films (3D), bent-glued products.
Membrane vacuum press FENG XI CMF2500A | Table 2555x1280 mm.

- Tool-grinding machine ARTECH LEVIA 110 Italy , width 1100
- Tool-grinding machine BU Beaver SR-RP 1300A

A - line splicing wood RC-3 + FS-3 | Tenoning machine + press for splicing.
A - line optimizing OMGA T 2005 OPT | 260х100 mm, 310х50 mm, 5.5 kW, 120 km/TNM.
A - line optimization control unit Omga T 2010 NC | 180 m/min, 80 to 90 cuts/min.
- Double-sided tenoning machine V-HOLD MX 2614 A | 2010 V. Lзаг. 1400 mm.
- Machining centre CNC IMA BIMA 300/V BOO | 2013

- Powder painting line MASTER | Length 6200 mm. drying and painting.
- Line of endless splicing Howial control unit HVP-18 | Max. section 200x100 mm, Pneumatics.

There is always a large selection of woodworking machinery, for more information call us :
Valentin 8 926 417 52 05
Translated by «Yandex.Translator»

Offline