Special offer
Selling Lumber planed:board deciduous:oak in Kursk region Russia №49465 | WoodResource.com
Organization name: LLC "Banishchanskaya Dacha"
Tax id:
Type: Planed:board
Wood species: Deciduous:oak
Moisture content: Dried
Length in mm: 420 - 1520
Width in mm: 98 - 158
Thickness in mm: 3.2
Stock: In stock
Price per cubic meter: 8.71 $
Ad: selling wooden containers in Rybnoe Ryazan region Russia
Organization name: LLC "Bonitet"
Tax id:
Type: Wooden container
Moisture content: Dry
Length in mm: 1000
Width in mm: 1000
Height in mm: 1000
Price per item: 39.33 $
Selling Lumber edging:board conifers:cedar in Tomsk region Russia №50769 | WoodResource.com
Organization name: Levada LLC
Tax id: 7000008130
Type: Edging:board
Wood species: Conifers:cedar
Moisture content: Fresh sawn
Length in mm: 4000 - 6000
Width in mm: 25 - 300
Thickness in mm: 25 - 300
Stock: In stock and on order
Price per cubic meter: 185.14 $
Selling Lumber: Planed:board in Vologda region Russia №49806
Feb. 28, 2024, 6:48 p.m.Views: 1263
City: Vologda, Vologda region, Russia.
Organization name: show name and reputation
Type: Planed:board
Wood species: Conifers:spruce
Moisture content: Dried
Length in mm: 2400 - 6000
Width in mm: 95 - 195
Thickness in mm: 38 - 45
Stock: In stock and on order
Price per cubic meter: 304.93 $
Description:
Name: Calibrated Frame Board;
Breed: Spruce, Pine;
Calibration: Planing from 4 sides, round chamfers R2mm;
Humidity: 14-16% (chamber drying);
Strength Class (MPa): 18, 24, 30;
Cross sections (mm): 38x64, 38x89, 38x140, 38x184, 38x235;
Cross sections (mm): 38x70, 38x95, 38x145, 38x195, 38x220, 38x245;
Cross sections (mm): 45x70, 45x95, 45x145, 45x195, 45x220, 45x245;
Length (mm): up to 6000;
The quality is controlled by the Association of Manufacturers of Sorted and Labeled Lumber - "R" Mills
Attention! We have the opportunity to produce and supply ready-to-build support posts precisely clamped -/+2mm in length from 2.4 m to 3.0 m. The frame frame of the house of 100-120 m2 carries about 70-80 external support posts with a cross section of 45x145mm (or even 45x195mm) and about 60-80 internal support posts with a cross section of 45x95mm. The support posts must be precisely clamped at 90 degrees from both ends. In total, these are 40-50 running meters (almost half the length of a football field) that need to be sawn through. In factory conditions, a 2-sided miter conveyor passing machine will do its job more accurately and faster than mending racks piece by piece directly at the construction site. We recommend ordering the ready-to-use tack racks.
Contact details: show contacts
Translated by «Yandex.Translator»