Woodworking equipment
#1 Nov. 1, 2013 11:27:46
Woodworking equipment
Company OOO “TD”Kotelnich Mechanical plant" develops and manufactures high-performance equipment which allows their owners to extract maximum benefit in the process, to achieve high rates of speed and beneficial effect on the production.
We are ready for You to develop an optimal technology to deliver "turnkey", depending on your specific requirements and budget of the project, from one piece of equipment to an entire complex-shop, as well as to upgrade existing lines, in order to integrate our equipment into Your production. www.tdkmz43.ru 8-800-200-0222 Translated by «Yandex.Translator» Edited admin (Oct. 23, 2020 21:32:17) Offline #2 Sept. 12, 2015 09:30:40
Woodworking equipment
Himself from the Amur region, in 2011, booked in the Trading House “KMZ” new development JWP-600. He had doubts to take or not to take have not tested the machine. But all doubts were gone after visiting the plant, saw a serious production and the process, met with the foreman of the Assembly machines. Installation was no problem, along with the machine came the brigade installers are all set and trained my team. Working for 4 years, changed only the chain.
Thank you, guys! Translated by «Yandex.Translator» Offline #3 Oct. 13, 2015 08:19:19
Woodworking equipment
Good day, give advice on equipment??? Interested in production of wood concrete blocks as we have developed it and you can buy the right equipment? Thank you!
Translated by «Yandex.Translator» Offline #4 Oct. 14, 2015 08:50:56
Woodworking equipmentKomrad Good day! We are pleased that you came to us for advice and paid attention to our equipment. Can be purchased as a full line for producing wood concrete blocks, and special equipment such as chippers. What are You interested? Translated by «Yandex.Translator» Offline #5 Oct. 19, 2015 11:37:02
Woodworking equipment
Good day. Please write the whole technology of preparation of the equipment from the MALL?
Translated by «Yandex.Translator» Offline #6 Oct. 21, 2015 06:35:26
Woodworking equipment
Good day! The production technology is as follows:
The first stage is a crushing raw wood wood concrete wood chips in the desired fraction. - The next stage is the preparation for cement wood mixture by mixing pre-prepared chips, Portland cement and water. The main stage is the process of pressing a mixture of high-tech concrete block machine developed by the specialists of LLC “TD KMZ”, with a unique technology that allows to eliminate this disadvantage, as raspressovki elastic mixture and the violation of the compacted structure after removal of the formwork. The final stage of the technological chain - warehousing. Received arbolitovye blocks are stored and incubated for 2-3 days at a temperature of 20-25 WITH up to full readiness. Translated by «Yandex.Translator» Offline #7 Oct. 29, 2015 06:15:36
Woodworking equipment
What equipment can I use? What the company offers “the Mall”?
Translated by «Yandex.Translator» Offline #8 Oct. 30, 2015 09:10:10
Woodworking equipment
Good afternoon, thank you for your interest in our equipment.
Trading House “KMZ” offers a ready-made line for production of wood concrete blocks. They include the following equipment: Mixer 1 PC. - power 7.5 Vibropress 1 piece -moshnosti.5 Chipper FMT-2 (A) 1pc. - moshnosti.5 Press form (HH) 1pc. power 33.5 sincerely, company TD “KMZ”. Translated by «Yandex.Translator» Offline #9 Nov. 2, 2015 11:19:00
Woodworking equipment
Rather not interested in production, and equipment for the manufacture of arbatovoj chips to continue to sell it for recycling...Email the details on chipping the car, thank you.
Translated by «Yandex.Translator» Offline #10 Nov. 5, 2015 07:02:01
Woodworking equipment
Good afternoon, thank you for the interest shown to this issue. Disk chipper “MOLOMA” FMT-2 is used as the mechanism for grinding of raw materials and secondary grades of waste wood to wood chips. The minimum fraction of the chip is only 3 mm.
The model with the number 2 in the title has analogues with more powerful engines and efficiency. Also the differences observed in the weight of plants, number of knives and hammers and other parameters. So, a chipping installation the FMT-2 has a productivity of 2 m3/h, as can be seen from the index in the title. Among all modifications of cars it has the smallest engine capacity. Machine FMT-2 is perfect for small wood processing enterprises and private farms, besides the specialists of the technical Department, CMH has developed special models for the production of wood concrete, fuel chips and raw materials for the pellets. Due to the simplicity and reliability of a design, "rubella" is able to maintain stable productivity during entire period of operation. Small size crushing plants allow to use it in small areas, and also in production with limited power. Translated by «Yandex.Translator» Offline |
