Need advice on sawing oak and ash

#1 July 11, 2016 08:35:01

Добрый
Registered: 2015-06-01
Posts: 3
Profile   Send e-mail  

Need advice on sawing oak and ash

Friends in dire need of advice on proper sawing oak and ash. What better equipment, where to find workers at a sawmill, where train workers to efficiently cut wood of valuable species, etc.
Thanks in advance for the advice.
Translated by «Yandex.Translator»

Offline

#2 July 13, 2016 03:11:26

Евгений
Registered: 2012-09-12
Posts: 48
Profile   Send e-mail  

Need advice on sawing oak and ash

Hello! Try to look in your region lesotehnikuma or forestry institutions. There just can help. A list of schools in the country here.
Translated by «Yandex.Translator»

Edited admin (Oct. 23, 2020 20:16:19)

Offline

#3 Feb. 16, 2017 02:39:29

виктор павлович
Registered: 2017-02-03
Posts: 4
Profile   Send e-mail  

Need advice on sawing oak and ash

he worked at the sawmill for 2 years! had to cut ash, oak, elm, birch. very well shown vertically directed bandsaw with belt width 14-16 cm working 50:50 Russian and Chinese! Russian was taught directly by the Chinese... about half a year and Russian roly alone I could sit safely at the machine. logs were fed to the saw with a cart.... have Kamili in manual( if the block is 5 cm and width of about 40cm, then the eyes on the forehead climb..))) about the origin of the machines, I can say that they were Asian (Korea toli toli China). mainly sawed to the floorboard with a thickness of 2.3 cm... well, something like this
Translated by «Yandex.Translator»

Offline

#4 Feb. 16, 2017 10:35:55

Добрый
Registered: 2015-06-01
Posts: 3
Profile   Send e-mail  

Need advice on sawing oak and ash

interested in everything, but then not a lot of information from the forum, to be honest (
Translated by «Yandex.Translator»

Offline

#5 Feb. 16, 2017 10:39:19

Добрый
Registered: 2015-06-01
Posts: 3
Profile   Send e-mail  

Need advice on sawing oak and ash

anyone know what size the Chinese have us sawing for themselves, which they then exported, there's something in between?
Translated by «Yandex.Translator»

Offline

#6 Feb. 26, 2017 22:58:52

виктор павлович
Registered: 2017-02-03
Posts: 4
Profile   Send e-mail  

Need advice on sawing oak and ash

Good
anyone know what size the Chinese have us sawing for themselves, which they then exported, there's something in between?
took almost all of.... parquet Board 30 sizes and three varieties! further, the Board and the three bars on 900 30.... in General, these issues directly with the customers are negotiated!

Translated by «Yandex.Translator»

Offline