Special offer
Selling Lumber edging:board conifers:pine in Tomsk region Russia №44401 | WoodResource.com
Organization name: LLC "KB "Basalt"
Tax id: 7017286946
Type: Edging:board
Wood species: Conifers:pine
Moisture content: Natural
Length in mm: 4000 - 6000
Width in mm: 50 - 200
Thickness in mm: 25 - 50
Stock:
Price per cubic meter: 201.37 €
Selling Lumber edging:board conifers:larch in Tomsk region Russia №44376 | WoodResource.com
Organization name: IP Darbaev Artem Yurievich
Tax id: 701720731260
Type: Edging:board
Wood species: Conifers:larch
Moisture content: Natural
Length in mm: 4000 - 6000
Width in mm: 100 - 200
Thickness in mm: 25 - 50
Stock:
Price per cubic meter: 193.31 €
Selling Lumber edging:board conifers:pine in Tomsk region Russia №44363 | WoodResource.com
Organization name: IP Kazachenko Svetlana Viktorovna
Type: Edging:board
Wood species: Conifers:pine
Moisture content: Natural
Length in mm: 3000 - 6000
Width in mm: 80 - 220
Thickness in mm: 25 - 50
Price per cubic meter: 169.14 €
Equipment: Equipment and installations for drying and heat treatment (thermomodification) of wood. TMD camera- "Energia-Thermo - Stavropol TM14". No boiler room required. Price 2.75 million rubles (19.3.21). №16319
April 22, 2022, 9:02 a.m. Views: 1823
City: Arkhangelsk, Arkhangelsk region, Russia.
(also in regions of
Russia
(
Krasnodar region
Saint Petersburg
Organization name: show name and reputation
Type: Drying equipment
Equipment name: Equipment and installations for drying and heat treatment (thermomodification) of wood. TMD camera- "Energia-Thermo - Stavropol TM14". No boiler room required. Price 2.75 million rubles (19.3.21).
Price: 42,047.09 €
Description:
Equipment and installations for drying and heat treatment (thermomodification) of wood. TMD camera- "Energiya Thermo Stavropol TM14". A boiler room is not required. The price is 3.5 million rubles (16.7.2021).
It is intended for drying and subsequent heat treatment of sawn timber from coniferous, soft and hard deciduous wood species without reloading the combustion products of gaseous - LPG or natural gas - fuel in an oxygen-free environment (otherwise - obtaining thermal wood, thermal strips, TMD). The heat treatment temperature is up to 220 ° C.
It is also possible to carry out only wet drying or only heat treatment of dry lumber. Warping of lumber is excluded due to the use of spring ties of the stack.
To obtain 1 cubic meter of thermal wood, 50 liters of propane and 60 kWh of electricity are consumed.
The payback period of the purchased equipment, provided that it is fully loaded, is no more than six months of continuous operation.
The order execution period is 60 days. days.
- version-mobile, sea container 20 ft/6m;
- placement - outdoor;
- completeness-a camera, a stableable trolley, spring ties of the stack - 6 sets for a total force of 2.5 tons, external and folding rail tracks;
- degree of readiness - full factory, boiler room is not required;
- control cabinet - based on a programmable controller with the ability to connect to a PC directly or remotely;
- the material of the inner lining is stainless steel on a layer of basalt mineral water 150 mm;
- requirements for the site for placement - 14x3 meters;
- requirements for power grids:
- power supply: 380V; 2.0 kW;
- gas supply-the main option-liquefied gas-ramp for 10-12 propane cylinders of 50 liters each; gas pressure-3 kPa; G3/4;
- gas supply-additional option-low-pressure natural gas-G3/4; 40 nm3 / hour; gas pressure-1.3 kPa;
- the start-up period - when the site and power networks are ready - (1-2) days;
- stack:
- overall dimensions and volume: LxWxH= 4, 6x1, 6x1, 7 m; Vgab= 12.5 m3;
- maximum loading volume - for a board of 50 mm-V50= 9.0 m3 (gaskets of 20 mm);
- maximum loading volume - for a board of 30 mm-V30= 7.5 m3 (gaskets of 20 mm);
- drying and thermal modification terms (TMD) for a 50 mm board (for a 25 mm board - the terms are half as long):
- coniferous-drying- (5-7)days, TMD - (2-4) days;
- hard deciduous-drying- (12-15) days, TMD - (2-4) days;
- oak-drying- (20-24) days, TMD - (2-4) days;
- monthly productivity in a 50 mm board (in a 30 mm board - 1.5 times more):
- drying and subsequent TMD:
- coniferous-36 m3/month;
- hard deciduous-18 m3/month;
- oak-13 m3/month;
- drying only:
- coniferous-45 m3/month;
- hard deciduous-23 m3/month;
- oak-15 m3/month;
- only TMD of dry lumber:
- coniferous-65 m3/month;
- hard deciduous-60 m3/month;
- oak - 55 m3/month;
- warranty - 12 months.
Post-warranty service-under an additional contract. Maintainability due to the use of domestic equipment is high.
Detailed information is available on the website of " sushkalesa.RF"
Contact details: show contacts
Translated by «Yandex.Translator»