Special offer
Selling Lumber edging:board conifers:larch in Irkutsk region Russia №49356 | WoodResource.com
Organization name: LLC "ELITFOREST"
Tax id:
Type: Edging:board
Wood species: Conifers:larch
Moisture content: Natural
Length in mm: 3000 - 4000
Width in mm: 67
Thickness in mm: 37
Stock:
Price per cubic meter: 163.59 $
Selling Lumber edging:board conifers:pine in Ryazan region Russia №49079 | WoodResource.com
Organization name: Express Group LLC
Tax id:
Type: Edging:board
Wood species: Conifers:pine
Moisture content: Dried
Length in mm: 5700 - 6000
Width in mm: 125 - 225
Thickness in mm: 25 - 50
Stock:
Price per cubic meter: 190.86 $
Selling Wood Mouldings lining conifers:pine in Novgorod region Russia №48926 | WoodResource.com
Organization name: Inter-Forest LLC
Tax id:
Type: Lining
Wood species: Conifers:pine
Moisture content: The dry forest
Price per meter: 0.29 $
Price per square meter: 3.27 $
Equipment: HR-1.5 T, HR-T 2.0 HR 3.0 T, HR-T 4.0 Machine obessolivanija lugs on the wires №36406
July 11, 2019, 12:09 p.m.Views: 353
City: Stary Oskol, Belgorod region, Russia
Organization name: show name and reputation
Type: Other
Equipment name: HR-1.5 T, HR-T 2.0 HR 3.0 T, HR-T 4.0 Machine obessolivanija lugs on the wires
Price: 0.01 $
Description:
• These presses are semi-automatic machines the initial level. Their undeniable advantage is the constant power wire that goes directly to the tip, which ensures accurate positioning of the contact and the quality of the crimping process.
• The model number of machines for obessolivanija bits on the wire there are models with crimping force of 1.0 to 6.0 tons. The press is delivered in both standard and customized specifications.
• Possibility of replacement of the applicator and expulsion of the knives allow you to use different types of tips. Can operate both in manual and in automatic mode.
• Crimping dies can be manufactured in accordance with the requirements of the technical specifications of the client.
Features
• The advantage of this machine is the constant power wire that goes directly to the tip, which ensures accurate positioning of the contact and the quality of the crimping process.
• Most often used on sites where additional capacity is required.
• Press comes in both standard and customized specifications.
• Possibility of replacement of the applicator and expulsion of the knives allow you to use different types of tips.
• Can operate both in manual and in automatic mode.
• Low noise, high performance and variable speed capability wire along with the ability to track the number of produced operations make these machines irreplaceable in small manufacturing.
• The capacity is approximate — 4500 PCs/hour
• Air pressure 0.6 MPa
Contact details: show contacts
Translated by «Yandex.Translator»