+ Add advertisement

Equipment: Drum drying unit of the AVM series mod. 0,65 №42694

Warning! The advertisement is expired and archived.

April 3, 2021, 5:42 p.m.Views: 493

City: Kirov, Kirov region, Russia.

Also in regions of: showhide
Loading, please wait...

Organization name: show name and reputation

Type: Drying equipment

Equipment name: Drum drying unit of the AVM series mod. 0,65

Price: 31,865.50 $

Description:
The drum drying unit AVM mod. 0,65 is designed for the preparation of raw materials for granulation and briquetting. The equipment is used at the drying stage and serves to reduce the moisture content of the material. The drying procedure takes place as a result of moving the raw material along the drying drum along with the hot air in the wind tunnel. As a heat generator, a solid fuel furnace block is used, which is heated with wood in any form and thereby reduces energy costs. In one pass, the drying unit is able to dry the raw material to a humidity of 10-20%, which meets the requirements of the correct technological process of granulation and briquetting.

Technical specifications:

The humidity of the raw material after drying is 10-20% (depends on the raw material itself and the air temperature)
Capacity up to 1500 kg / hour
Total power consumption 33.5 kW 380 V
Electric motor power of the drying drum fan 22 kW 380 V
Drying drum drive power 4 kw 380 V
Type of equipment: aerodynamic, drum, paddle, single-pass
Raw materials for drying wood (sawdust, wood chips, shavings), agricultural raw materials (grain and grass crops), peat (lowland and riding)
The permissible size of the raw material for drying is 25 x 25 mm.
The permissible humidity of the raw material for drying is up to 60%
The type of heat generator is a furnace block that is assembled on site from fireclay bricks
Fan power of the furnace block (furnace blowing) 1.5 kW 380 V (3000 rpm)
Heat generator capacity 1 MW
Type of fuel for the heat generator wood in any form
Method of fuel supply to the furnace by means of a screw conveyor mod. TSHG-200 (4 meters)
Conveyor gear motor power 3 kW 380 V
Fuel consumption 300-400 kg / hour
Maximum hot air temperature up to 800 degrees
The operating temperature of the hot air when drying is 450-650 degrees
Method of loading raw materials for drying manual or automated feeding
Lock gate drive power (loading of raw materials) 1.5 kW 380 V
Method of unloading dried products bottom discharge through a precipitation cyclone
Gateway gate drive power (raw material discharge) 1.5 kW 380 V
Number of service personnel 1 person
The required area for accommodation is 48 m2
The required ceiling height of the room is 7 m.
Dimensions 12 x 4 x 6.5 m.
Weight 11000 kg.

Contact details: show contacts



Translated by «Yandex.Translator»