+ Add advertisement

Equipment: Four-sided machine VH-MB521 №50371

April 26, 2024, 11:38 a.m.Views: 227 (stats)

City: Chelyabinsk, Chelyabinsk region, Russia

Organization name: show name and reputation

Type: Woodworking equipment:four-sided machines

Equipment name: Four-sided machine VH-MB521

Price: 33,263.72 $

Description:
Four-sided machine VH-MB521, planing and rolling 5-spindle machine. Purpose - production of molded products with a maximum processing width of 210mm, height up to 140mm and a speed of 6-36 m/min.
For example, a four-sided machine can be used to calibrate a board, calibrate a bar, or a lamella before or after splicing. The machine can also be used for the production of lining, floor boards, trim and other mouldings of a simple profile.
Four-sided machines are used in small, medium and large enterprises for the production of mouldings, building beams, furniture boards. This type of equipment is an integral part of the technology in the production of building timber and other profiled products.


DISTINCTIVE FEATURES
Solid-cast frame and wear-resistant work table;
High-precision spindles with a rotation speed of 6500 rpm
Feed system – upper grooved rollers at the inlet, polyurethane rollers at the outlet, drive and idle rollers in the table, side clamps;
Drive system – reinforced gearboxes via cardan shafts;
Stepless feed rate adjustment – inverter with electronic indicator;
Two-circuit adjustment of pneumatic clamps;
Two control panels and an additional "emergency stop" button;
Table lubrication system for working with resinous wood species.


Technical characteristics of the four-sided machine VH-MB 521
Number of spindles, pcs. 5
Maximum working width, mm 25-210
Maximum working thickness, mm 8-140
The length of the workpiece, mm from 200
Length of the desktop, mm 1800
Feed rate, m/min 6-36
Spindle mounting diameter, mm 40
Spindle speed, rpm 6500
The first upper spindle, 7.5 kW
The first lower spindle, 5.5 kW
Second lower spindle, 5.5 kW
Left and Right vertical spindle, kW 5.5/ 5.5
Power of the traverse lifting engine, kW 0.75
Feed motor power, kW 4
Total power, kW 34.25
The diameter of the tool on the 1st spindle (mm) 125
Tool diameter on vertical spindles (mm) 125-180
Tool diameter on horizontal spindles (mm) 125-180
Air pressure, 0.6 MPa
Diameter of the feed roller, mm 140
Chip removal diameter, mm 140
Overall dimensions , mm 3800x1650x1900
Machine weight, kg 3000

The set includes 4 spiral cutters with carbide plates.

Contact details: show contacts



Translated by «Yandex.Translator»