Equipment: SKD-100m3 drying chamber for drying lumber №48839

April 11, 2024, 9:11 a.m.Views: 421

City: Moscow, Russia.

Organization name: show name and reputation

Type: Drying equipment

Equipment name: SKD-100m3 drying chamber for drying lumber

Price: 64,121.10 $

Description:
The SKD-100 drying complex based on wood waste with a UVN-400M heat generator.

The drying complex is designed for drying lumber with a one-time loading of a drying chamber of 100 cubic meters with automatic control, autonomous heat supply from the UVN heating unit.

The heat carrier is heated air, which is supplied to the drying chamber from the heating unit by a fan. The maximum temperature of the coolant is 85-90 degrees.

The drying chamber is a modular prefabricated steel structure with the possibility of moving to another location.

Sandwich panels with mineral wool insulation with a density of 110 kg/m3 are used as wall and roof elements. Wall and roof panels have linings.

Sandwich panels made of aluminum, sheet thickness 0.8, with mineral wool insulation with a density of 110 kg/m3, of own production, with an outer wall made of profile metal, were used as wall and roofing elements.

The modular design allows additional modules to be connected, which expands the capabilities of the complex and significantly reduces the cost of the upgraded complex. The gate of the chamber is hermetically sealed, sliding on a rail using a lifting/recoil mechanism.

There is a door between the chamber and the furnace compartment, where the UVN heating unit is located, for servicing the chamber during the drying cycle.

Thermally protected axial reversible fans are installed in the SCD chamber, which ensure the optimal required speed of air movement through stacks of lumber.

The ventilation system for the supply and distribution of coolant consists of: a discharge fan, axial reversible fans mounted on a frame under a raised ceiling, a system of supply and exhaust ducts.

The fuel for the heat unit is woodworking waste (sawdust, bark, shears, dead wood, firewood). Pre-grinding, sorting, and other fuel preparation is not required. The fuel can be supplied to the furnace in mixed form, even with a high degree of humidity (up to 65%) without pre-drying. The installation is easy to maintain and reliable in operation, allows you to recycle waste and reduce the cost of drying lumber. The download is manual.

The automatic wood drying control system is made up of controller modules. The system includes 8 moisture sensors of lumber, 2 temperature sensors, 2 equilibrium humidity sensors. The software of the system allows drying of various types and grades of wood (spruce, pine, oak, birch, larch). The control and operation of the equipment is carried out by the Litouch automation system. Active control of the final moisture content of lumber is up to 7%, and control is carried out according to the average humidity value.

Along with active monitoring and programmatic regulation of the drying process, the automatic control system monitors the condition of the equipment and ensures trouble-free operation of the installation. The system has three operating modes: automatic, semi-automatic, and manual.

The drying complex is supplied in the form of separate blocks and nodes, and is assembled on a pre-prepared foundation. The foundation is made by the Customer according to the drawings of the Supplier.

Contact details: show contacts